Page 1 of 2
Why no viewing of DWT?
Posted: 15 Jun 2006, 10:52
by Peter
Hello
I want to view DWT-files (they are identical to DWG) and edited my wincmd.ini, adding the DWT-extension:
Code: Select all
5=D:\Program Files\totalcmd\plugins\Cadview\CADView.wlx
5_detect="FORCE | EXT="DWG" | EXT="DWT" | EXT="DXF" | EXT="PLT" | EXT="HGL" | EXT="RTL" | EXT="HG" | EXT="PLO" | EXT="HP" | EXT="HPG" | EXT="HPGL" | EXT="PRN" | EXT="HP2" | EXT="SVG" | EXT="CGM""
But I have no success - DWTs are shown only with binary code, but not as a drawing.
How to view DWTs?
Peter
Posted: 16 Jun 2006, 19:32
by support
Hello Peter!
Thank you for the interesting remark. We will take it into account and inform about results.
Sergey.
please post questions to the forum or write to
support@cadsofttools.com
Posted: 25 Jun 2006, 21:05
by Peter
hello
something new? Maybe a schedule for a new release?
Peter
Posted: 27 Jun 2006, 17:14
by support
Dear Peter,
The question is not so simple as it could seem first. Of course, we can add support of DWT file format basing on our DWG libraries but first we need to make necessary researches to study possible problems (exceptions, access violations etc.) And only after some testings the positive decision will be taken.
Sergey.
please post questions to the forum or write to
support@cadsofttools.com
Posted: 27 Jun 2006, 23:28
by Peter
Sergey
I am not a software specialist and I am curious about what the difference is between DWG and DWT. I made a lot of DWGs, renamed them to DWT - and that's it. Same format, some content, ...
Best regards
Peter
Posted: 06 Sep 2006, 19:53
by Peter
Hello
something new with testing?
Peter
Posted: 08 Sep 2006, 19:54
by support
Hello Peter!
The problem has been solved. Updated CADView is available on:
http://www.cadsofttools.com/download/cadview.zip
Sergey.
please post questions to the forum or write to
support@cadsofttools.com
Posted: 08 Sep 2006, 21:00
by Peter
Hello
it seem to work ..
Peter
Posted: 27 Sep 2006, 14:52
by Peter
By the way:
The files BAK (not all of them, I know)and SV§ are DWG-files which could be displayed in CadView. All of them has the code "AC10" on beginning of file.
Peter
Posted: 27 Sep 2006, 15:00
by support
Hello Peter!
Thank you for the information. We will take it into account for the future.
Sergey.
please post questions to the forum or write to
support@cadsofttools.com
Posted: 25 May 2007, 19:42
by Peter
Hello
why the new version does not have this function (viewing of sv$ and bak witg "AC10..")? [:(]
Peter
Posted: 28 May 2007, 11:34
by support
Hello Peter,
why the new version does not have this function (viewing of sv$ and bak witg "AC10..")?
This problem has not been solved yet because we have no final decision on how support of sv$ and bak files to be implemented.
Sergey.
Please post questions to the forum or write to
support@cadsofttools.com
Re:
Posted: 12 May 2008, 11:41
by Peter
support wrote:Hello Peter,
This problem has not been solved yet because we have no final decision on how support of sv$ and bak files to be implemented. ...
Something new?
Peter
Re: Why no viewing of DWT?
Posted: 12 May 2008, 16:20
by support
Hello Peter,
This question is in a discussion state till now. We will keep you informed.
Sergey.
Re: Why no viewing of DWT?
Posted: 24 Apr 2009, 17:08
by Peter
Seem to be fixed in Version 7, but not listed in "Change.txt/History.txt".
True?
Peter